Here you can make changes to your standards after you have drawn up a job.
To Open the Change Standards on This Job Window:
1. Click on Change on the Main Menu Bar
2. Click on the Change Standards on This Job item.
The Change Standards on this Job window has 4 buttons on the top of the window. Height + Depth, Faces + Fronts, Door + Drawer and Mirror + Change. Clicking on each button will bring a new listing of options.
Below the buttons are a series of From and To boxes. In the From column you would type in the original number and in the To box you would type in the new amount. For example, If you wanted to change the depth of base cabinets from 24 to 25, you would type in 24 in the From column and then type 25 in the To column and click the OK. This will change all 24" depths on base cabinets to 25". If you had a base cabinet with a 21" depth, it would not be changed. If you decided that you changed your mind, and didn't want make the change, there is an undo button, it will only undo the last change made.
The Height + Depth, Faces + Fronts and Door + Drawer pages all work in the same manner, the Mirror + Change page is a bit different. Here you can change your Frame cabinets to Frameless or Overlay Frame, or vice versa. You can also rotate your job 90 degrees left or right, or make a mirror image. All of these functions operate on the entire job.
Shortcut:
Toolbar: Click on
