To Turn on or change Dimensions on the Screen:
1. Click on view on the main menu bar
2. Click on dimension level
3. Make sure there is a check mark next to any selection except none
Dimension Level 1
Dimension level 1 shows the least amount of dimensions. It will show some basic information on the screen about your job. For example it will show you the cabinet width on the screen.
Dimension Level 2
Dimension level 2 shows a little more information about the job on your screen. For example it will show cabinet width and height, open spaces on the wall, and overall wall lengths.
Dimension Level 3
Dimension level 3 shows the opening sizes on the cabinets.
Dimension Level 4
Dimension level 4 shows the most amount of detail. It will show all of the dimensions as in level 1 and 2 and in addition will show faceframe widths, opening widths and so on. Due to the detailed information available it may "clutter" the cabinet with information that may be too small to read clearly. This is easy to change by either:
Changing to a lower dimension level or
Or
Changing the size of the dimension font to a little larger
Door Size
Door Size dimension shows the size of the door. The method in which this is calculated is by taking the opening width or height then adding the overlay or door lip.
Short Cut Keys:
Dimension Level 1 - The letter D then the number 1
Dimension Level 2 - The letter D then the number 2
Dimension Level 3 - The letter D then the number 3
Dimension Level 4 - The letter D then the number 4
Door Size Dimensions - The letter D then the letter S
No Dimensions - The letter D then the number 0
Toolbar: Click on
