Move Unit

To Open The Move Unit Window:

1. Click on Change and then Move Unit

To Move a Unit Using the Move Unit Window:

1. Type in the unit number for unit that will be moved and hit the enter key.

2. Type in the new location number and hit the enter key.

3. Type in the new off floor measurement and hit the enter key.

4. Type in the new from wall measurement and hit the enter key.

5. Type in the new angle amount and hit the enter key

6. Click the OK button.

       To move a unit after you have placed it on a wall open the Move Unit Window. To open this window click on Change and then Move Unit. To do this with the keyboard press the ALT key and use the arrow keys to highlight Change. Now use the down arrow key to select Move Unit and hit enter.

       The Move Unit Window has 5 boxes:

       Unit #:        The number in sequence for the cabinet, if it was the third unit you designed then its unit # is 3. The unit number can be found in the center of the cabinet when looking at the elevation of a wall. Type the number of the unit you want to move in this box.

       Location:        This is the new location for the unit measuring from the left edge of the wall to the left side of the unit. If it is placed at location 50, the unit will be 50 inches away from the left end of the wall.

       Off Floor:        This is the amount in inches that the cabinet is off the floor. This item would be used if you wanted to place flowers on a counter top or another accessory.

       From Wall: This is the amount in inches that the cabinet is off the wall. This is measured from the back of the cabinet. If the cabinet is placed 10 inches off the wall it will be pulled straight out of the wall 10 inches. There will be a 10 inch space behind the cabinet.

       Angle:        This is the amount you are able to "turn" a unit on a wall, it will be placed at a 45 degree angle on the wall if this box has a 45 in it.

Copyright © 2007 KCDw Software