Tutorial - Drag and Drop - Starting a Job

If you would rather read these directions on paper, click on print on the main menu bar above in this help file to print it out.

When starting a job:

1. Check to see which library you are in.  Look under the Library Menu Item.

2. Set your sizes for the job.  Click on Set Shop Standards on the Change Menu Item

3. Set your door styles for the job.  Click on Change All Doors on the Door Menu Item

4. Set the customer heading.  Click on Page Heading on the File Menu Item.

       Now your ready to begin your design. For the tutorial you don't need to change any standards in the Set Shop Standards screen because we are going to design basic cabinets. If you use steps 1-4 on every job it will help you design quickly and more accurately. Sizes and door styles must be set before the job is designed.

Click on highlighted words below when finished with this page:

Tutorial - Drag and Drop - Placing Walls

Tutorial - Drag and Drop - Placing Cabinets

Copyright © 2007 KCDw Software